Heretical Builders  

Go Back   Heretical Builders > Main Forum > Solid State Power Devices

Solid State Power Devices All solid state generators and energy converters.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-13-2012, 08:22 PM
harishsingh harishsingh is offline
Apprentice
 
Join Date: Aug 2012
Posts: 2
Post Self-Generating Discharge Plasmatron by Alexander V. CHERNETSKII

Hi All,
I've been following the works of Wideografer in his video



Zero point Enerfy aus Rhoeren .

This is a practical implementation of Chernetskii Pulse Discharge circuit and has potential to tap the ether to harvest enourmous energy. It's not a solid state circuit per se, in that it uses vacuum tubes to accelerate the plasma electrons. But the vacuum tube is only used as a practical plasma generator and can be replaced with a glow discharge tube if necessary.

According to the info I have, the vacuum tubes used initially were 6P3S (EL-34 equivalent), but had burnouts in trials.

http://www.rexresearch.com/chernetskii/chernetskii.htm
Quote:
Technical aspects of experimental SGD device were not detailed by Chernetsky in [1] but he explained the ways to get SGD. By his definition, self-generating discharge is special type of electrical arc that can be created at certain value of density of discharge current. Since volt-ampere diagram of any arc consist of decreasing and increasing part, Chernetsky noted two ways for self-sustaining electrical oscillations: at first, small current way on the decreasing part of the diagram when the resistance of the arc is negative, and at second, great current way on the increasing part of the diagram when the arc plasma electrons are interacting with strong magnetic field of plasma (so called pinch-effect was found by Chernetsky in 1960th). First way seems me as most simple and effective way and there were produced some simple experiments to prove it [8]. But Alexander V. Chernetsky used the second way to get the self-sustaining oscillation in plasma. He noted: the pinch-effect produce the radial electrical field in the arc and corresponding radial magnetic field. In development of his explanation let me note: since the primary source create axial movement of changed particles between electrodes, the reason of radial separation and additional energy of the plasma particles is well-known Lorenz force. Positive feedback in this circuit is the next: pinch-effect compress the plasma in radial direction, then radial electromagnetic field interact with axially moving particles of plasma to increase radial separation, so the energy of plasma particles is increasing up to change of electrodes polarity that stop the arc process. The change is produced by plasma particle and the source is direct current source only. The changes of electrodes polarity are possible only if the energy of the particle is increased in process of the movement in the arc gap between electrodes. Capacity and inductive parameters of experimental device define the resonance frequency of the oscillations. Chernetsky tested 3MHz oscillations and duration of pulses was about 30 microseconds. He used voltage 600VDC (direct current source). The plasma was created in hydrogen at pressure about 0.1 T.
Please post any critics of this work and hopefully questions if any.


Regards,
HS
Attached Files
File Type: pdf 100231125-Cherne-Tsk-i.pdf (996.2 KB, 8 views)
File Type: pdf nm_e_transform_plasma_oscillation.pdf (13.1 KB, 3 views)
Reply With Quote
  #2  
Old 08-14-2012, 05:17 AM
Inquorate's Avatar
Inquorate Inquorate is offline
Admin
 
Join Date: Oct 2009
Location: nsw australia
Posts: 1,141
Default Re: Self-Generating Discharge Plasmatron by Alexander V. CHERNETSKII

ok I'll ask a question. is it known how the circuit engages with the aether? are there sources that reference the technology? how did the inventor? come.across the technology? what anomalous artifacts did he/she first notice?

cheers,
Ben
__________________
Heretical Builders Admission Policy - Heretical Builders

To join this forum, send an email to hereticalbuilders01@gmail.com with an introduction, username and password
Reply With Quote
  #3  
Old 08-14-2012, 06:14 PM
harishsingh harishsingh is offline
Apprentice
 
Join Date: Aug 2012
Posts: 2
Post Re: Self-Generating Discharge Plasmatron by Alexander V. CHERNETSKII

Quote:
Originally Posted by Inquorate View Post
ok I'll ask a question. is it known how the circuit engages with the aether? are there sources that reference the technology? how did the inventor? come.across the technology? what anomalous artifacts did he/she first notice?

cheers,
Ben
Hi,

Resonance.

There are numerous accounts of Tesla doing this with nothing more than a few tubes in the famous 'black box'. It's said, to drive the Pierce Arrow, Tesla went into a shop, bought 6 vacuum tubes and proceeded to arrange them in a box. Then he attached a motor (presumably an AC motor) to this vacuum device and drive the car.

Then there is also the account of Tesla having been called upon to repair a radio station(hertz waves) where he used his methods to correct the stations circuitry. That he did this with his famous tuned circuit has been - well - hidden and suppressed.

http://www.teslaradio.com/pages/tesla.htm


Quote:
how did the inventor? come.across the technology?
The inventor is A. Chernetsky. Presumably, as a physicist he came up on this while experimenting in plasma.

He describes the technology as

"The self-generating discharge (SGD) emerges when the discharge current reaches a definite critical density, when the magnetic fields they create ensure magnetisation of plasma electrons and they begin to perform MOSTLY CYCLOID movements. The interaction of currents with their magnetic fields forces the electrons to deviate to the cylinder-shaped discharge axis and the electrical field emerges. It has proved to 'switch on' the physical vacuum; in this field the vacuum is polarized and consequently the virtual pairs begin to move IN A DEFINITE DIRECTION, instead of chaotically. The current in the circuit builds up and additional energy is discharged on the resistor (that is) switched into the discharge circuit (load). Clearly, only part of the tremendous vacuum energy is extracted."


Quote:
what anomalous artifacts did he/she first notice?
"The current in the circuit builds up and additional energy is discharged on the resistor (that is) switched into the discharge circuit (load)."

The experiments which he is said to have carried out include attaching additional load in the form of lamps and measure the input (amp draw).

http://www.rexresearch.com/chernetskii/chernetskii.htm

You can see the effect here towards the end of the video.
http://www.youtube.com/watch?v=lA87r58iCXo

Regards,
HS
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:26 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.